Many of us consider getting our air conditioners serviced as the weather starts to heat up. After all, no one wants to be stuck in the heat with a broken air conditioner and needing to shop air conditioner when it can still be repaired!

However, aircon servicing is not always as straightforward as we would like it to be. A number of potential problems can occur, which can be both frustrating and costly.

In this blog post, we will look at 8 of the most common problems that can occur during aircon servicing and how to fix them.

  1. Not enough refrigerant

One of the most common problems that can occur during aircon servicing is insufficient refrigerant. This can result from a leak or simply because the system is not adequately charged.

If this is the case, you will first need to locate the leak and repair it. Once the leak has been fixed, the system can be recharged with refrigerant.

  1. Dirty coils

Another common problem that can occur during aircond servicing is dirty coils. When the waves are messy, it can reduce the system’s efficiency and cause it to overheat.

To clean the coils, you will need to turn off the power to the unit and remove the access panel. Once the board is removed, you can use a soft brush or cloth to remove any dirt or debris from the coils.

  1. Clogged drain line

Another potential problem that can occur during aircon servicing is a clogged drain line. This can be caused by a build-up of dirt, dust, and debris.

If the drain line is clogged, it can cause water to back up and overflow into the unit. To fix this problem, you will need to unclog the drain line. This can be done using a wet/dry vacuum or a plumbers snake.

  1. Fan problems

Another common problem that can occur during aircon servicing is fan problems. If the fan is not working correctly, it can cause the unit to overheat and eventually shut down.

To fix this problem, you will need to turn off the power to the unit and remove the access panel. Once the board is removed, you can access the fan and clean it with a soft brush or cloth.

  1. Thermostat issues

Another potential problem that can occur during aircon servicing is thermostat issues. If the thermostat is not working correctly, it can cause the unit to overheat and eventually shut down.

To fix this problem, you will need to turn off the power to the unit and remove the access panel. Once the board is removed, you can access the thermostat and clean it with a soft brush or cloth.

  1. Leaks

Another common problem that can occur during aircon servicing is leaks. This can be caused by several different factors, such as a loose fitting or a damaged seal.

If you suspect that there is a leak, the first thing you will need to do is turn off the power to the unit. Once the power is off, you can inspect the unit for leaks. If you find a leak, you must repair it before proceeding.

  1. Ice buildup

Another potential problem that can occur during aircon servicing is ice buildup. This can be caused by several factors, such as a dirty filter or a low refrigerant level.

If you notice ice buildup on the unit, you first need to turn off the power to the unit. Once the power is off, remove the access panel and inspect the unit for any ice buildup.

  1. Noisy operation

Another common problem that can occur during aircon servicing is noisy operation. This can be caused by several factors, such as a dirty fan or a loose component.

To fix this problem, you will need to turn off the power to the unit and remove the access panel. Once the panel is removed, inspect the unit for any dirt or debris. Once you have located the source of the noise, you can then take the necessary steps to fix it.

We hope this blog post has helped identify some of the most common problems during aircon servicing. If you are experiencing any of these problems, we recommend contacting a professional aircond sevice Penang for assistance.